Produktai skirti rato jutiklis (3)

Particular Challenge: For the assessment of rotating parts, numerous parameters have to be taken into consideration: Concentricity, radial run-out and axial run-out (i.e. wobble); furthermore thickness, diameter, planarity and the absence of surface defects had to be examined. The solution developed by QuellTech consists in a configuration of three Q6 Laser Laser Scanners.Each of the lateral surfaces is assigned to its own scanner. In order to enable the thickness precisely to be determined, both laser lines are mutually oriented in opposite direction. The third scanner inspects the outer circumference of the wheel, this way measuring diameter and radial run-out. All of these scanners are subject to encoder signals supplied by the rotary axis and synchronously triggered, so possible defects on the wheel can precisely be localized. The measurement takes place at a resolution of ca. 30 µm, and a cloud comprising several millions of points are obtained. Country of origin:Germany Inline Inspection: :100% Laser wavelength:blue 405nm or 450 nm, red 650 nm

Wir fertigen jedes Gehäuse nach Kundenwunsch Sie können zwischen Schraubgehäuse oder Gehäusen zum Kleben wählen. Unsere Kunden verwenden meist den Schnellklebstoff X60 von Hottinger. Das Gehäusematerial besteht aus einem korrosionsarmes Aluminium.

Non-contacting multi-channel stainless-steel speed sensor, difference-Hall principle. Due to its design and type approval according to DIN EN 50155 especially suitable for transport technology. Optionally with current output signal. Robust and high quality housing: IP69 pressure-tight and individually tested at 5 bar (for details see technical data). Excellent vibration and shock resistance and double protection of the sensor head. Connection outlet straight or lateral; with protective tubing on request. Detection of very low speed (near zero speed). Material:Stainless steel Supply voltage:9...32 VDC Frequency range:0.2 ... 20,000 Hz Measuring channels:1, 2, status signal as option Scanning object:Ferromagnetic materials Scanning object - distance:0.2 ... 3 mm; recommended: 1.0 ± 0.5 mm Operating temperature:-40 ... +120 °C Protection class:Housing: IP66/IP68/IP69 Standards:DIN EN 50155, DIN EN 55016, DIN EN 50121